Introduction to the manual transmission anatomical operation training bench (front drive)
Based on the original Volkswagen front-drive manual transmission, the AC motor is the power source, and the manual transmission can be shifted and other actual operations. It truly shows the structure, principle and working process of the manual transmission. It is suitable for the practical training and teaching needs of various types of colleges and training institutions for the theory and maintenance training of automobile manual transmission.
The training function is complete, easy to operate, safe and reliable, and beautiful.
(2) Structural composition
Volkswagen front-drive original manual transmission assembly, reduction mechanism, gear lever assembly, AC motor, mobile platform, etc. Equipped with a training instruction book and a bench operation manual for the task-driven teaching mode.
The bench is installed with casters with locking universal direction, and protective devices are installed on the high temperature and rotation parts of the bench.
(3) Features
1. The manual transmission operates normally.
2. The training platform is equipped with safety protection devices such as the main power switch and the protective cover of other rotating parts.
3. The transmission can undergo practical tests such as shifting.
4. Pravi originalni ročni prenos se uporablja za mehansko rezanje, da se v celoti prikaže notranja in zunanja struktura mehanskega dela prenosa.
5. Each mechanical section of the transmission is sprayed with different colors of paint.
6. The transmission input shaft is driven by the motor drive mechanism to truly demonstrate the power transmission process in different gears.
7. The base part of the training bench is welded with steel structure, and the surface of the bench is painted with a universal self-locking caster device.
(4) Technical parameters
1. Dimensions: 1100mm X 800mm X 1250mm (length X width X height)
2. Power supply: 220V AC voltage
3. Input power: 220V AC voltage
4. Working power supply: 12V DC voltage
5. Working temperature: -50 degree -50 degree ,
6. Motor: 220V/750W
